Tools and resources:
1. Newest Phoenix Service Software
2. CA-101 USB Data Cable
3. Nokia C3 RM-614 newest Firmware Package
Step By Step:
1. Run Phoenix Service Software
2. Make a choice Open Product
3. Choose RM-614
4. Select “Flashing " Tab
5. Select Firmware Update
6. Browse Nokia C3 RM-614 Firmware Package on product code box
7. Check Dead Phone USB Flashing
8. Click “Refurbish “Tab
9. Attach phone to USB
10. Wait until all process done
Here are the log operations:
Flashing started
Creating product data items list
Product data items list created
Backup not necessary
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. be sure USB cable, Battery and charger are detached from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- depress phone's power button! ---
Loading secondary boot code: 14656 bytes
Secondary boot loaded
Loading Updates server code: 557974 bytes
Update server loaded
Partitioning....
Partitioning complete
erasing....
Erasing complete
Asics CMT: Start programming 48334 KB...
Asics CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asics CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asics CMT: Programming data sent: 60%
Asics CMT: Programming data sent: 70%
Asics CMT: Programming data sent: 80%
Asics CMT: Programming data sent: 90%
Asics CMT: Programming data sent: 100%
Programming complete
WARNING: Asics CMT: NAND status reported bad blocks
Asics CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 12
Phone flashing completed. Waiting for phone to boot up
Boot up successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factory sets
Factory sets complete
Reading Dynamic Camera Configuration ID 1
Updating configuration of camera with ID 1
Dynamic Camera Configuration updating failed: 0x84167501 - Audiovisual: No configuration file matching the camera name string NI00BC0000040102F201 was found.
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded, result code: 0
Starting to backup/restore data item: Product Profile, version: 1.1
Data Item backup/restore completed: Succeeded, result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure finished: Succeeded, result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
Data item pre-delay
Sub-procedure finished: Succeeded. Result code: 0
Starting to backup/restore data item: ISSVariantActivator, version: 1.0
Data Item backup/restore finished: Succeeded, result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure finished: Succeeded, result code: 0
Backup/restore result: 0 out of 2 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.
